MELIANI Mohamed
Email : meliani.mohamed@uit.ac.ma
Établissement : Faculté des Langues des Lettres et des Arts
Laboratoire : Littérature, Arts et Ingénierie Pédagogique
← Retour au laboratoire
📚 Publications Scopus — Total : 112
| Titre | Année | 🔗 Voir |
|---|---|---|
| Enhanced Corrosion Inhibition of the Steel Pipes in Acidic Media Using Datura Stramonium L. and Calotropis Procera (Aiton) Extracts | 2026 | 🔗 Voir |
| Numerical Investigation of Hydrodynamics and Heat Transfer in Rheological Fluid Flow Through Channels with Different Baffle Shapes to Optimize Heat Exchanger Thermo-Hydraulic Performance | 2026 | 🔗 Voir |
| The role of the second non-vanishing terms in the material failure curve on APL 5L steel | 2025 | 🔗 Voir |
| Influence of Desulfovibrio ferrophilus IS5 Biofilm on the Biocorrosion of Carbon Steel | 2025 | 🔗 Voir |
| Effect of Combining Moringa oleifera and Datura stramonium Extracts as a Green Corrosion Inhibitor for Mild Steel | 2025 | 🔗 Voir |
| Development of a New Approach for Assessing the Fracture Toughness of Gas Pipe Steels | 2025 | 🔗 Voir |
| Modeling of Textured Hydrostatic Thrust Bearings and Lubricating Films with Variable Thickness | 2025 | 🔗 Voir |
| Orientation-dependent SRB biofilm adhesion and formation on carbon steel in injection water environments | 2025 | 🔗 Voir |
| VIBRATION ANALYSIS OF INDUCTION MOTOR FOR BEARING FAULTS DETECTION USING ESPRIT METHOD | 2025 | 🔗 Voir |
| STUDY OF THE VIBRATORY BEHAVIOUR OF SPHERICAL 3D LAMINATED COMPOSITE SHELL | 2025 | 🔗 Voir |
| INVESTIGATING PLASTIC INSTABILITY OF DD14 STEEL SHEET IN DEEP DRAWING PROCESS: A MATERIAL CHARACTERISATION AND FEM ANALYSIS OF DIE RADIUS IMPACT | 2025 | 🔗 Voir |
| INSPECTION BY NDT-DT TESTING TO ANALYSE AND CONTROL FRICTION ROTATING WELDING OF AISI 304L AND AISI 316L STAINLESS STEEL GRADE | 2025 | 🔗 Voir |
| Spintronic Prospects of Half-Heusler Alloy MnAuSn: DFT and Hybrid Functional Studies of Magnetic and Electronic Properties | 2025 | 🔗 Voir |
| Proposal Ecofriendly In-House Inhibitor for Mitigating Corrosion in The Algerian Oil and Gas Industry: Electrochemical Analysis, Surface Morphology and Mechanical Properties | 2025 | 🔗 Voir |
| A CRITICAL REVIEW ON ENERGY DISSIPATER CONTROL STRATEGIES FOR STRUCTURAL VIBRATION CONTROL | 2025 | 🔗 Voir |
| Behavior, failure analysis, and effectiveness of mechanical stress improvement process in residual stress relaxations in butt-welded austenitic piping using a numerical simulation approach | 2024 | 🔗 Voir |
| Enhanced electrocatalytic activity of Ni-Mn-Co-Fe alloys for efficient hydrogen and oxygen evolution reactions: A study on the effects of electrodeposition parameters | 2024 | 🔗 Voir |
| Portulaca oleracea as a Green Dual-Action Biocide and Corrosion Inhibitor Against Thiosulfate-Reducing Bacterial Biofilms on Carbon Steel | 2024 | 🔗 Voir |
| An investigation into equilibrium, Kinetics, and thermodynamics of yellow bemacid dye removal from Aqueous Solutions using pomegranate skin (PG) and Date Pedicels (DPd) as Green Adsorbents | 2024 | 🔗 Voir |
| A dual fracture mechanical approach for estimating notch stress intensity factor and T-stress using volumetric methods on API 5L pipe steel: Experimental study and numerical validation | 2024 | 🔗 Voir |
| Exploring NRB Biofilm Adhesion and Biocorrosion in Oil/Water Recovery Operations Within Pipelines | 2024 | 🔗 Voir |
| Quantitative Assessment of Agitator Performance in an Anchor-Stirred Tank: Investigating the Impact of Geometry, Eccentricity, and Rheological Characteristics | 2024 | 🔗 Voir |
| Preparation, inspection, and optimization of rotary friction welding parameters for 2017aa aluminum alloy specimens | 2024 | 🔗 Voir |
| Numerical analyses on limit load of X60 pipe elbow in different internal corrosion-damaged positions under combined internal pressure and in-plan bending moment | 2024 | 🔗 Voir |
| Synthesis of hybrid organosilicon materials of various chemistries as efficient protective coatings for mild steels in NaCl media | 2024 | 🔗 Voir |
| Temperature effects on the resistance capacity of API X60 pipe elbow under bending moment using X-FEM method | 2024 | 🔗 Voir |
| PHOTODETECTORS PERFORMANCE OF NANOSTRUCTURED MATERIALS IN ANTIMONY III-V InGaAsSb/AlGaAsSb INTERBAND CASCADE STRUCTURES | 2024 | 🔗 Voir |
| EXPERIMENTAL CREEP TEST SENSIBILITY OF MECHANICAL PROPERTIES OF LDPE FILMS USED AS GREENHOUSE ROOF | 2024 | 🔗 Voir |
| EFFECT OF FORCED VIBRATIONS OF BRAKE PADS ON THE THERMAL PERFORMANCE OF THE DISC: A NUMERICAL PERSPECTIVE | 2024 | 🔗 Voir |
| NUMERICAL STUDY OF BAFFLE PARAMETERS EFFECT ON FIELD FLOW AND POWER CONSUMPTION | 2024 | 🔗 Voir |
| Identification of the mechanical properties and surface morphology of the friction still welding on aluminum alloy specimens | 2024 | 🔗 Voir |
| Thermomechanical effect on the properties of stainless steels using rotative friction welding: an experimental study on 304L and 316L grades | 2023 | 🔗 Voir |
| Mechanistic insights into acid orange 7 azo dye (AO7) reduction using DFT calculations | 2023 | 🔗 Voir |
| Investigating the use of Moringa Oleifera leaf extract as an environment-friendly corrosion inhibitor for API 5L X52 steel in 1 M HCl | 2023 | 🔗 Voir |
| Investigating the Sorption Isotherms and Hysteresis of a Round Perforated Brick Using Newly Developed Models | 2023 | 🔗 Voir |
| Evaluation of Inhibition Efficiency of Thymus Extract as a Corrosion Inhibitor of Aluminum Alloy 5083 in an Ethylene Glycol/NaCl Corrosive Medium | 2023 | 🔗 Voir |
| Benzaldehyde reduction over Cu-MCM-41 catalyst: Influence of the Si/Cu ratio during hydrothermal synthesis on the structure and catalytic properties | 2023 | 🔗 Voir |
| Free vibration analysis of porous functionally graded plates using a novel Quasi-3D hyperbolic high order shear deformation theory | 2023 | 🔗 Voir |
| Effects of composite and metallic patch on the limit load of pressurized steel pipes elbow with internal defects under opening bending moment | 2023 | 🔗 Voir |
| TRANSIENT TEMPERATURE FIELDS EFFECTS ON MULTI-PASS WELDING IN A BUTT JOINT OF AUSTENITIC PIPING | 2023 | 🔗 Voir |
| INSPECTION AND PROPOSAL FOR THE REPAIR METHOD OF A CRACKED EXPANSION JOINT ON HEAT EXCHANGER USING COMPOSITE SLEEVES | 2023 | 🔗 Voir |
| Facile Preparation of Supported Copper-modified SBA-15 Catalysts for efficient Benzaldehyde Hydrogenation | 2022 | 🔗 Voir |
| Influence of hydrogen embrittlementon mechanical properties of pipe steels | 2022 | 🔗 Voir |
| Proposal Engineering Methods to Repair/Replace Bend Elbow Pipe Contain Internal Corrosion Defect | 2022 | 🔗 Voir |
| FLUID-STRUCTURE INTERACTION OF AN AIRFOIL EQUIPPED WITH AN ACTIVE CONTROL SYSTEM: NUMERICAL SIMULATION AND POSITIONING STUDY | 2022 | 🔗 Voir |
| FRACTURE MECHANICS COMPUTATION TO ESTIMATE THE CONSTRAINT PARAMETERS AND CRACK PATH ORIENTATION | 2022 | 🔗 Voir |
| EFFECTS OF PRE-BUCKLING IN-PLANE DEFORMATION AND CURVATURE TERMS OF LAMINATED PLATES USING REFINED THEORY | 2022 | 🔗 Voir |
| Extended stress intensity factor model from short to long cracks | 2022 | 🔗 Voir |
| Preface | 2022 | 🔗 Voir |
| A MECHANICAL PERFORMANCE STUDY AND SIMULATION OF A HYBRID ELECTRIC VEHICLE POWERED BY Ni-MH BATTERY | 2021 | 🔗 Voir |
| Effect of metal oxide additives on the structural and barrier properties of a hybrid organosilicon sol-gel coating in 3.5% NaCl medium | 2020 | 🔗 Voir |
| Hybrid Organosilicon-Metal oxide Composites and their Corrosion Protection Performance for Mild Steel in 3.5% NaCl Solution | 2020 | 🔗 Voir |
| Experimental and numerical investigation of UIC 54 rail degradation | 2020 | 🔗 Voir |
| Characterization of 2017A Anodized Aluminum Alloy by Infrared Thermographic Techniques and SEM Observations During Tensile Testing | 2020 | 🔗 Voir |
| Corrosion effect, constraint and path orientation estimated in cracked gas turbine blade | 2020 | 🔗 Voir |
| Failure assessment diagram (FAD) and patch repairing index (PRI) on damaged structure reinforced by a composite patch | 2020 | 🔗 Voir |
| Microstructure evolution in friction welding of AISI 316 | 2020 | 🔗 Voir |
| Effect of gas tungsten arc welding parameters on the corrosion resistance and the residual stress of heat affected zone | 2020 | 🔗 Voir |
| Impact resistance of API 5L steel in aggressive environment with the presence of green inhibitors | 2020 | 🔗 Voir |
| Pipe networks transporting hydrogen pure or blended with natural gas, design and maintenance | 2019 | 🔗 Voir |
| Optimization parameters for circumferentially welded pipes | 2019 | 🔗 Voir |
| Analytical and numerical investigation using limit analysis on the ductile failure of pipes containing surface cracks | 2019 | 🔗 Voir |
| Assessment of API X65 steel pipe puffiness by a strain based design (SBD) approach under bi-axial loading | 2019 | 🔗 Voir |
| Inspection of internal erosion-corrosion of elbow pipe in the desalination station | 2019 | 🔗 Voir |
| Numerical study of semi-elliptical cracks in the critical position of pipe elbow | 2019 | 🔗 Voir |
| Effect of corrosion damage on a pipeline burst pressure and repairing methods | 2019 | 🔗 Voir |
| Reliability Analysis of Type III Gas Storage Vessel Under Pressure Loading | 2019 | 🔗 Voir |
| Correction to: Efficiency of Green Inhibitors Against Hydrogen Embrittlement on Mechanical Properties of Pipe Steel API 5L X52 in Hydrochloric Acid Medium (Journal of Bio- and Tribo-Corrosion, (2018), 4, 3, (36), 10.1007/s40735-018-0153-0) | 2019 | 🔗 Voir |
| Passive structural control of a model car drag by transverse separating plates | 2019 | 🔗 Voir |
| Assessment of corrosion inhibitory effect of ruta chalepensis flavonoid extracts on API 5L X52 steel in 1M HCL Medium | 2019 | 🔗 Voir |
| MCM-41 Supported Copper-Based Catalysts: Physicochemical Characterizations and Catalytic Performances in the Gas Phase Hydrogenation of Benzaldehyde | 2018 | 🔗 Voir |
| Hydrogen embrittlement effect on the structural integrity of API 5L X52 steel pipeline | 2018 | 🔗 Voir |
| Efficiency of Green Inhibitors Against Hydrogen Embrittlement on Mechanical Properties of Pipe Steel API 5L X52 in Hydrochloric Acid Medium | 2018 | 🔗 Voir |
| Corrosion defect analysis using domain failure assessment diagram | 2018 | 🔗 Voir |
| Reduction of hydrogen embrittlement of API 5l X65 steel pipe using a green inhibitor | 2018 | 🔗 Voir |
| Corrosion Inspection and Recommendation on the Internal Wall Degradation Caused Rupture of 6” Gas Line Pipe | 2018 | 🔗 Voir |
| Effect of sand particles on the Erosion-corrosion for a different locations of carbon steel pipe elbow | 2018 | 🔗 Voir |
| Analytical prediction of behaviour of damaged composite tubular structures under quasi-static pressure | 2018 | 🔗 Voir |
| Assessment of PIPE for CO 2 transportation using a constraint modified CTOD failure assessment diagram | 2018 | 🔗 Voir |
| Performance evaluation of a natural and synthetic compound as corrosion inhibitors of API 5l X52 steel in hydrochloric acid media | 2018 | 🔗 Voir |
| Effect of Sandblasting on Tensile Properties, Hardness and Fracture Resistance of a Line Pipe Steel Used in Algeria for Oil Transport | 2017 | 🔗 Voir |
| T-stress estimation by the two-parameter approach for a specimen with a V-shaped notch | 2017 | 🔗 Voir |
| Assessment of Pipe Defects Using a Constraint-Modified Failure Assessment Diagram | 2017 | 🔗 Voir |
| Transferability of fracture toughness with constraint | 2017 | 🔗 Voir |
| Corrosion effects and green scale inhibitors in the fracture mechanics properties of gas pipelines | 2017 | 🔗 Voir |
| Crack path stabilisation and T-stress estimation in connection with the global approach for inclined notches | 2017 | 🔗 Voir |
| The two-parameter approach for fracture mechanics: Some industrial applications | 2017 | 🔗 Voir |
| Numerical simulation of the interactions among multiple turbulent swirling jets mounted in unbalanced positions | 2016 | 🔗 Voir |
| Drilling Repair Index (DRI) based on two-parameter fracture mechanics for crack arrest holes | 2016 | 🔗 Voir |
| Finite element analysis of the integrity of an API X65 pipeline with a longitudinal crack repaired with single- and double-bonded composites | 2015 | 🔗 Voir |
| A two-parameter approach to assessing notch fracture behaviour in clay/epoxy nanocomposites | 2015 | 🔗 Voir |
| The master failure curve of pipe steels and crack paths in connection with hydrogen embrittlement | 2015 | 🔗 Voir |
| Residual harmfulness of a defect after repairing by a composite patch | 2015 | 🔗 Voir |
| A review of fracture toughness transferability with constraint and stress gradient | 2014 | 🔗 Voir |
| Effect of composite fibers orientations on crack behavior of a thin plate by finite element method simulation | 2014 | 🔗 Voir |
| The master failure curve of pipe steels and crack paths in connection with hydrogen embrittlement | 2013 | 🔗 Voir |
| Effects of notch radius on the master failure curve of the SENB specimens | 2012 | 🔗 Voir |
| The philosophy of constraint correction by the global approach | 2012 | 🔗 Voir |
| Fracture assessment procedure of API 5l gas pipe steels | 2012 | 🔗 Voir |
| Two-parameter fracture criterion (K ρ,c -T ef,c ) based on notch fracture mechanics | 2011 | 🔗 Voir |